Configuring ISP Information

Configuring ISP Profile

System > Network > Routing > ISP Profile

To configure an ISP route, you need to firstly add a subnet to an ISP, and then configure the ISP route. The destination of the route is determined by the name of the ISP. You can customize ISP information, or upload profiles that contain different ISP information.

In the ISP Profile page, you can perform the following actions:

Click New to create a new ISP profile.
Click Edit to edit the selected ISP profile.
Click Delete to delete the selected ISP profiles.
Click Upload to upload the predefined ISP file or the user-defined ISP file.
Click Save to save the user-defined ISP files to your local disk.

Options in the ISP Configuration dialog:

Option	Description
ISP Profile	Type the name for the new ISP profile into the textbox.
Subnet Prefix	Type the IP address for the subnet into the textbox.
Subnet Mask	Type the subnet mask into the textbox.
Add	Click Add to add the subnet to the ISP profile. The subnet will be displayed in the ISP subnet list below.
Delete	Delete the selected ISP profiles.