Configuring ISP Information

To configure an ISP route, you need to firstly add a subnet to an ISP, and then configure the ISP route. The destination of the route is determined by the name of the ISP. You can customize ISP information, or upload profiles that contain different ISP information. Besides, StoneOS ships with a pre-defined ISP profile that contains two ISPs: China-telecom and China-netcom.

Creating an ISP Profile

To create an ISP profile, take the following steps:

  1. On the Navigation pane, click Configure > Network > Routing to visit the Routing page.
  2. On the ISP Profile tab, click New.
  3. In the ISP Configuration dialog, type the name for the new ISP profile into the ISP profile box.
  4. Type the IP address for the subnet into the Subnet Prefix box.
  5. Type the subnet mask into the Subnet mask box.
  6. Click Add to add the subnet to the ISP profile. The subnet will be displayed in the ISP subnet list below.
  7. If needed, repeat Step 4 to Step 7 to add multiple subnets for the ISP profile.
  8. Click OK to save your settings.

Uploading an ISP Profile

To upload an ISP profile, take the following steps:

  1. On the Navigation pane, click Configure > Network > Routing to visit the Routing page.
  2. On the ISP Profile tab, click Upload.
  3. In the Upload ISP Configuration from PC dialog, click Upload predefined IPS file or Upload user-defined IPS file.
  4. Click Browse to select an ISP profile in your PC, and click Upload to upload it to StoneOS. The version number is displayed in the Current predefined ISP line below.

Saving a Customized ISP Profile

To save a customized ISP profile to your PC, take the following steps:

  1. On the Navigation pane, click Configure > Network > Routing to visit the Routing page.
  2. On the ISP Profile tab, click Save.
  3. In the Save User-defined ISP Configuration to PC dialog, select an ISP profile from the ISP profile drop-down list.
  4. Click Save to save the profile to a specified location in PC.

Editing/Deleting an ISP Profile

To edit/delete an ISP profile, take the following steps:

  1. On the Navigation pane, click Configure > Network > Routing to visit the Routing page.
  2. On the ISP Profile tab, select the ISP profile you want to edit/delete from the list below.
  3. Click Edit or Delete to edit or delete the profile.